甘肃做高端网站山东济南最新消息
3D相关的动画都是继承Grid3DAction
本质上是用GirdBase进行创建动画的小块。
Shaky3D
晃动特效
// 持续时间(时间过后不会回到原来的样子)
// 整个屏幕被分成几行几列
// 晃动的范围
// z轴是否晃动
static Shaky3D* create(float initWithDuration, const Size& gridSize, int range, bool shakeZ);
关键实现
void Shaky3D::update(float /*time*/)
{int i, j;for (i = 0; i < (_gridSize.width+1); ++i){for (j = 0; j < (_gridSize.height+1); ++j){Vec3 v = getOriginalVertex(Vec2(i ,j));v.x += (rand() % (_randrange*2)) - _randrange;v.y += (rand() % (_randrange*2)) - _randrange;if (_shakeZ){v.z += (rand() % (_randrange*2)) - _randrange;}setVertex(Vec2(i, j), v);}}
}
示例代码
cc.Shaky3D:create(5, cc.size(15,10), 5, false)
Waves3D
波浪特效
// 持续时间(时间过后不会回到原来的样子)
// 整个屏幕被分成几行几列
// 波动的速率
// 振幅
static Waves3D* create(float duration, const Size& gridSize, unsigned int waves, float amplitude);
源码
void Waves3D::update(float time)
{int i, j;for (i = 0; i < _gridSize.width + 1; ++i){for (j = 0; j < _gridSize.height + 1; ++j){Vec3 v = getOriginalVertex(Vec2(i ,j));v.z += (sinf((float)M_PI * time * _waves * 2 + (v.y+v.x) * 0.01f) * _amplitude * _amplitudeRate);//CCLOG("v.z offset is %f\n", (sinf((float)M_PI * time * _waves * 2 + (v.y+v.x) * .01f) * _amplitude * _amplitudeRate));setVertex(Vec2(i, j), v);}}
}
示例
cc.Waves3D:create(5, cc.size(15,10), 5, 40)
FlipX3D
X轴翻转动画
// 反转时间
static FlipX3D* create(float duration);
源码
void FlipX3D::update(float time)
{float angle = (float)M_PI * time; // 180 degreesfloat mz = sinf(angle);angle = angle / 2.0f; // x calculates degrees from 0 to 90float mx = cosf(angle);Vec3 v0, v1, v, diff;v0 = getOriginalVertex(Vec2(1.0f, 1.0f));v1 = getOriginalVertex(Vec2());float x0 = v0.x;float x1 = v1.x;float x;Vec2 a, b, c, d;if ( x0 > x1 ){// Normal Grida.setZero();b.set(0.0f, 1.0f);c.set(1.0f, 0.0f);d.set(1.0f, 1.0f);x = x0;}else{// Reversed Gridc.setZero();d.set(0.0f, 1.0f);a.set(1.0f, 0.0f);b.set(1.0f, 1.0f);x = x1;}diff.x = ( x - x * mx );diff.z = fabsf( floorf( (x * mz) / 4.0f ) );// bottom-leftv = getOriginalVertex(a);v.x = diff.x;v.z += diff.z;setVertex(a, v);// upper-leftv = getOriginalVertex(b);v.x = diff.x;v.z += diff.z;setVertex(b, v);// bottom-rightv = getOriginalVertex(c);v.x -= diff.x;v.z -= diff.z;setVertex(c, v);// upper-rightv = getOriginalVertex(d);v.x -= diff.x;v.z -= diff.z;setVertex(d, v);
}
示例
cc.FlipX3D:create(3)
FlipY3D
Y轴翻转动画
// 时间
static FlipY3D* create(float duration);
源码
void FlipY3D::update(float time)
{float angle = (float)M_PI * time; // 180 degreesfloat mz = sinf( angle );angle = angle / 2.0f; // x calculates degrees from 0 to 90float my = cosf(angle);Vec3 v0, v1, v, diff;v0 = getOriginalVertex(Vec2(1.0f, 1.0f));v1 = getOriginalVertex(Vec2());float y0 = v0.y;float y1 = v1.y;float y;Vec2 a, b, c, d;if (y0 > y1){// Normal Grida.setZero();b.set(0.0f, 1.0f);c.set(1.0f, 0.0f);d.set(1.0f, 1.0f);y = y0;}else{// Reversed Gridb.setZero();a.set(0.0f, 1.0f);d.set(1.0f, 0.0f);c.set(1.0f, 1.0f);y = y1;}diff.y = y - y * my;diff.z = fabsf(floorf((y * mz) / 4.0f));// bottom-leftv = getOriginalVertex(a);v.y = diff.y;v.z += diff.z;setVertex(a, v);// upper-leftv = getOriginalVertex(b);v.y -= diff.y;v.z -= diff.z;setVertex(b, v);// bottom-rightv = getOriginalVertex(c);v.y = diff.y;v.z += diff.z;setVertex(c, v);// upper-rightv = getOriginalVertex(d);v.y -= diff.y;v.z -= diff.z;setVertex(d, v);
}
示例
cc.FlipY3D:create(3)
Lens3D
凸镜特效
// 持续时间(时间过后不会回到原来的样子)
// 网格大小
// 凸镜中心点
// 半径
static Lens3D* create(float duration, const Size& gridSize, const Vec2& position, float radius);
源码
void Lens3D::update(float /*time*/)
{if (_dirty){int i, j;for (i = 0; i < _gridSize.width + 1; ++i){for (j = 0; j < _gridSize.height + 1; ++j){Vec3 v = getOriginalVertex(Vec2(i, j));Vec2 vect = _position - Vec2(v.x, v.y);float r = vect.getLength();if (r < _radius){r = _radius - r;float pre_log = r / _radius;if ( pre_log == 0 ) {pre_log = 0.001f;}float l = logf(pre_log) * _lensEffect;float new_r = expf( l ) * _radius;if (vect.getLength() > 0){vect.normalize();Vec2 new_vect = vect * new_r;v.z += (_concave ? -1.0f : 1.0f) * new_vect.getLength() * _lensEffect;}}setVertex(Vec2(i, j), v);}}_dirty = false;}
}
示例
cc.Lens3D:create(2, cc.size(15,10), cc.p(size.width/2,size.height/2), 240)
Ripple3D
水波特效
// 持续时间(时间过后不会回到原来的样子)
// 网格大小
// 凸镜中心点
// 半径
// 波动的速率
// 振幅
static Ripple3D* create(float duration, const Size& gridSize, const Vec2& position, float radius, unsigned int waves, float amplitude);
源码
void Ripple3D::update(float time)
{int i, j;for (i = 0; i < (_gridSize.width+1); ++i){for (j = 0; j < (_gridSize.height+1); ++j){Vec3 v = getOriginalVertex(Vec2(i, j));Vec2 vect = _position - Vec2(v.x,v.y);float r = vect.getLength();if (r < _radius){r = _radius - r;float rate = powf(r / _radius, 2);v.z += (sinf( time*(float)M_PI * _waves * 2 + r * 0.1f) * _amplitude * _amplitudeRate * rate);}setVertex(Vec2(i, j), v);}}
}
示例
// 持续时间(时间过后不会回到原来的样子)
// 整个屏幕被分成几行几列
// 波动的速率
// 振幅
cc.Ripple3D:create(t, cc.size(32,24), cc.p(size.width/2,size.height/2), 240, 4, 160)
Liquid
液体特效
// 持续时间(时间过后不会回到原来的样子)
// 整个屏幕被分成几行几列
// 波动的速率
// 振幅
static Liquid* create(float duration, const Size& gridSize, unsigned int waves, float amplitude);
源码
void Liquid::update(float time)
{int i, j;for (i = 1; i < _gridSize.width; ++i){for (j = 1; j < _gridSize.height; ++j){Vec3 v = getOriginalVertex(Vec2(i, j));v.x = (v.x + (sinf(time * (float)M_PI * _waves * 2 + v.x * .01f) * _amplitude * _amplitudeRate));v.y = (v.y + (sinf(time * (float)M_PI * _waves * 2 + v.y * .01f) * _amplitude * _amplitudeRate));setVertex(Vec2(i, j), v);}}
}
示例
cc.Liquid:create(3, cc.size(16,12), 4, 20)
Waves
带方向的波浪特效,水平与垂直
// 持续时间(时间过后不会回到原来的样子)
// 整个屏幕被分成几行几列
// 波动的速率
// 振幅
// 是否是水平方向
// 是否是垂直方向
static Waves* create(float duration, const Size& gridSize, unsigned int waves, float amplitude, bool horizontal, bool vertical);
源码
void Waves::update(float time)
{int i, j;for (i = 0; i < _gridSize.width + 1; ++i){for (j = 0; j < _gridSize.height + 1; ++j){Vec3 v = getOriginalVertex(Vec2(i, j));if (_vertical){v.x = (v.x + (sinf(time * (float)M_PI * _waves * 2 + v.y * .01f) * _amplitude * _amplitudeRate));}if (_horizontal){v.y = (v.y + (sinf(time * (float)M_PI * _waves * 2 + v.x * .01f) * _amplitude * _amplitudeRate));}setVertex(Vec2(i, j), v);}}
}
例子
cc.Waves:create(2, cc.size(16,12), 4, 20, true, true)